Support · English below
Hilfe & Kontakt
Für die iOS-App „Powerleap“ – dein täglicher Sprungkraft-Check.
Schreib uns
E-Mail: kontakt@heinz-itsysteme.de
Bitte nenne dein iPhone-Modell, die iOS-Version und die App-Version (ganz unten im Profil) und beschreibe kurz, was passiert ist. Ein Screenshot oder eine Bildschirmaufnahme hilft am meisten.
Erste Messung in einer Minute
1 · Hinstellen
Messen → „Springen“. iPhone hochkant seitlich hinstellen – Stativ, Stuhl oder an Flasche, Bücher oder Tasche gelehnt –, etwa hüfthoch, rund 2,5 m entfernt, sodass du samt Füßen ganz im Bild bist.
2 · Piep
Still stehen, bis der Piep kommt und „Bereit“ erscheint. Die Kamera filmt in Zeitlupe mit bis zu 240 Bildern pro Sekunde.
3 · Springen
Mit Armschwung springen, mit gestreckten Beinen landen. Die Höhe wird angesagt. Danach wieder still hinstellen – die Serie läuft ohne Anfassen weiter.
Ohne Stativ und ohne Helfer geht es auch: Profil → „Zeitlupe von Hand“ (selbst filmen oder Zeitlupe aus Fotos importieren) oder Profil → „Weitere Messwege (Schätzung)“ → „Ohne Ablage – Handy am Hosenbund“.
Häufige Fragen
Wie genau ist die Messung?
Zu jeder Messung zeigt die App eine Fehlerabschätzung (±). Zeitlupen-Messungen lassen sich Bild für Bild prüfen; Absprung und Landung kannst du selbst setzen. Was sich nicht Bild für Bild prüfen lässt (3D-Kamera, Bewegungssensor, Zeitlupe unter 100 Bildern pro Sekunde), heißt überall „Schätzung“ und zählt nicht als Rekord. Landest du mit gebeugten Knien, zeigt die Flugzeit zu viel – solche Sprünge zählen weder als Rekord noch für die Tagesform. Wie genau es wird, hängt von Aufbau, Licht und Bildrate ab. Die Messung wurde noch nicht mit einer Kraftmessplatte verglichen, und die App ersetzt keine Kraftmessplatte; sie ist ein Trainingswerkzeug, kein Medizinprodukt.
Was brauche ich?
Ein iPhone mit iOS 26. LiDAR (Pro-Modelle) macht die 3D-Schätzung genauer, ist aber nicht nötig. Für den Sprint mit Kamera-Lichtschranke reicht ein iPhone seitlich an der Strecke.
Wo sind meine Daten? Wie nehme ich sie aufs neue iPhone mit?
Alles bleibt auf deinem iPhone – kein Konto, kein Server. Auf ein neues iPhone kommen deine Messungen mit dem iCloud-Backup bzw. der Übertragung von iPhone zu iPhone. Als Tabelle: Profil → „Als CSV exportieren“. Details: Datenschutz.
Wie lösche ich etwas?
Eine Messung: Verlauf → Messung → „Messung löschen“ (oder zur Seite wischen). Alles: die App löschen. Mehr dazu im Datenschutz, Abschnitt 10.
Ein Sprung wurde falsch erkannt – was hilft dir beim Beheben?
Schick uns am besten die Zeitlupe (Verlauf → Messung → „Original-Video teilen“). Für hartnäckige Fälle: Profil → Diagnose → „Messdaten mitschneiden“ einschalten, den Fehler nachstellen und „Diagnose teilen“ an die Support-Adresse schicken. Was im Paket steckt (z. B. Gewicht und Reichhöhe, falls eingetragen), steht im Datenschutz, Abschnitt 6. Danach kannst du den Mitschnitt wieder ausschalten und mit „Mitschnitt löschen“ entfernen.
Was kostet die App?
Messen kostet nichts – unbegrenzt, in allen Übungen, mit Verlauf und CSV-Export. Kein Abo, keine Werbung, kein Konto.
Version 1.0 hatte noch eine einmalige Freischaltung „Powerleap Pro“; ab Version 1.0.1 brauchst du sie nicht mehr. Käufe und Zahlungen wickelt Apple ab, wir sehen sie nicht.
Support in English
Contact us
Email: kontakt@heinz-itsysteme.de
Please include your iPhone model, iOS version and app version (at the very bottom of Profile) and briefly describe what happened. A screenshot or screen recording helps most.
Your first measurement in one minute
- Set it down: Measure → “Jump”. Stand your iPhone upright to the side – tripod, chair, or leaned against a bottle, books or a bag – roughly at hip height, about 2.5 m away, so your whole body including your feet is in the picture.
- Beep: stand still until the beep and “Ready”. The camera films in slow motion at up to 240 frames per second.
- Jump: swing your arms, land with straight legs. Your height is announced. Then stand still again – the series keeps going hands-free.
No tripod and no helper? Use Profile → “Manual slow motion” (film it yourself or import a slow-motion video from Photos) or Profile → “Other methods (estimate)” → “No stand – phone on your waistband”.
How accurate is it?
Every measurement shows an error estimate (±). Slow-motion measurements can be reviewed frame by frame, and you can set take-off and landing yourself. Anything that can’t be checked frame by frame (3D camera, motion sensor, slow motion below 100 frames per second) is labeled “estimate” everywhere and never counts as a record. Land with bent knees and the flight time shows too much – those jumps count neither as records nor for readiness. Accuracy depends on setup, light and frame rate. The measurement has not yet been compared with a force plate, and the app doesn’t replace one; it is a training tool, not a medical device.
What do I need?
An iPhone with iOS 26. LiDAR (Pro models) makes the 3D estimate more accurate but isn’t required. For the sprint camera timing gate, one iPhone at the side of the track is enough.
Where is my data? How do I move it to a new iPhone?
Everything stays on your iPhone – no account, no server. Your measurements move to a new iPhone with an iCloud backup or iPhone-to-iPhone transfer. As a spreadsheet: Profile → “Export as CSV”. Details: Privacy.
How do I delete something?
One measurement: History → measurement → “Delete measurement” (or swipe it aside). Everything: delete the app. More in the privacy policy, section 10.
A jump was detected wrongly – how can I help?
Ideally send us the slow-motion video (History → measurement → “Share original video”). For stubborn cases: turn on Profile → Diagnostics → “Record measurement data”, reproduce the problem and send “Share diagnostics” to the support address. What the package contains (e.g. weight and standing reach, if entered) is listed in the privacy policy, section 6. Afterwards you can switch recording off again and remove it with “Delete recordings”.
What does it cost?
Measuring costs nothing – unlimited, in every exercise, with history and CSV export. No subscription, no ads, no account.
Version 1.0 still had a one-time unlock, “Powerleap Pro”; from version 1.0.1 you no longer need it. Apple handles purchases and payments, we don’t see them.